тест производительности системы, testing and benchmark
Дата публикации:
anGel21, 10.11.2006 - 16:45
PassMark PerformanceTest
PassMark PerformanceTest - быстрая, простая программа эталонного тестирования аппаратных средств компьютера, обспечивающая быструю оценку работы "железа". Поддерживаются однопроцессорные и двухпроцессорные системы. PerformanceTest позволяет вам объективно контролировать компьютер, используя множество различных скоростных тестов и сравнивать результаты с другими компьютерами. Результаты тестирования представляются в виде гистограммы, что позволяет быстро сравнить полученные результаты с множеством базовых компьютерных систем.
Набор тестов позволяет оценить общую производительность вашего ПК по сравнению с другими компьютерами. В программу входят двадцать семь стандартных тестов в семи группах, плюс еще пять для пользовательских тестов. Среди стандартных можно отметить тесты процессоров, 2D и 3D графики, дисковых накопителей, памяти, CD/DVD-приводов и многих других составляющих компьютера. Fast, easy to use, PC speed testing and benchmarking. PassMark PerformanceTest allows you to objectively benchmark a PC using a variety of different speed tests and compare the results to other computers. Find out if your PC is performing at its best. Compare the performance of your machine to similar machines. Measure the effect of configuration changes and upgrades. Avoid paying big bucks for poor performance. Make objective independent measurements on which to base your purchasing decision. Use the advanced tests to create you own benchmark scenarios www.passmark.com
Passmark PerformanceTest - это утилита эталонного тестирования аппаратных средств компьютера, которая обеспечивает быструю оценку работы "железа" (поддерживаются как однопроцессорные, так и двухпроцессорные системы). Результаты тестирования представляются в виде гистограммы, что позволяет быстро сравнить полученные результаты с множеством базовых компьютерных систем.
Whats New V6.1.Build 1013 Release Date 27/Mar/2008 Patch release
* Changed the startup of PerformanceTest to better support Virtual environments like VMWare. * Changed the mechanism to calculate the current CPU frequency as newer Intel CPU's (e.g. Core 2 Duo) that have been overclocked by lowered their bus speed multiplier may reflect a speed based on a higher bus speed multiplier. This does not impact the CPU benchmark scores.
Whats New V6.1.Build 1014 2/Apr/2008 Patch release
* Corrected a bug introduced in v6.1.1013 where the default number of CPU test processes was 1, rather than the number of CPU's. This resulted in much lower CPU scores if this default was not changed.
* Improved the disk tests for compressed disk volumes. * Improved the CPU frequency measurement introduced in PerformanceTest v6.1.1013 for certain newer Intel CPU's. * Corrected a bug where PerformanceTest V4.0 baseline files could not be loaded into PerformanceTest v6.1. * Corrected a crash bug on startup for a rare BIOS configuration.
PerformanceTest v.8.0 Build 1008 Год выпуска: 2012 ОС: Windows XP / Vista / 7 / 8 (x86) Язык интерфейса: Английский Лекарство: patch-keygen FFF Размер: 24 Мб
V8.0.Build 1027 - 9th/December/2013 Added support for AMD R9 290, 270 and R7 250 video cards Fixed a possible crash when retrieving hard disk information
Fixed the naming of some AMD RX 560 cards when they share the same device ID as the RX 460 Updated help to a new format to allow opening and display of current topic on Win10 systems Added a 64bit build of the DX12 test executable which will be launched on 64bit systems. Fixed a bug that was preventing the available compute units for video cards being retrieved which meant not being able to correctly name some models (eg Vega56/64)
Made a change so that the high powered card on dual graphics card systems is displayed in the "your card vs" comparisons Advanced Drive Test, fixed freeze bug when filesize is larger than the maximum allowed per the drive's filesystem. Advanced Drive Test, Widen the rows on the table and updated displayed precision for Latency Read/Write tests (will show microseconds, us, instead of ms where applicable). This is important when benchmarking very low latency RAM drives. Advanced Drive Test, Improved test consistency. Previously the creation of the test file and the the actual test period could overlap on some disk systems due to caching. This could cause a slow start to the test. If a drive respects caching directives this shoould no longer happen. Fixed openCL test crashing/not displaying an error message when no openCL library is available Added monitor DPI to baseline information Updated system information library to correctly report details about new hardware
V9.0 Build 1026 - 2nd/August/2018 Fixed a crash that could occur in the Advanced Disk Drive Performance test when a call to get the drive information failed Changed advanced memory test to allocate up to 25% of system ram (previously would limit to 2GB) Fixed a crash that could occur when adding a large amount of baselines at once using the baseline management window
Fixed a bug when enumerating display modes for the DX10 test where no compatible card would be found if there was a large amount (>500) of display modes Updated temperature offsets for some AMD Ryzen CPUs to make the temperatures more accurate
System information, Decreased timeout from 5 seconds to 1 when collection SMART information when waiting for scsi commands to timeout (decrease amount of time spent detecting temp sources and reading smart info when USB drives are attached) Temperature collection, support for CPU groups when retrieving per-core temperatures for Intel chipsets Temperature collection, initial support for AMD Ryzen 5000 Series (Family 19h) CPU info and temperatures Temperature collection, added support for Intel Tiger Lake chipsets Fixed a possible crash when viewing graphs Fixed an issue where is a drive tested was bitlocker encrypted then PerformanceTest might not match the partitions to the physical disk and display "Unknown drive" Stopped user interface resizing when 3D tests were running, sometimes during the start of DX10 test a resize message would get sent to PT which would fail and display a "Could not reset the Direct3D device" error
Fixed a crash that could occur in the disk test Baseline custom colours, changed the default yellow to a darker shade for better readability of white text when it is drawn over the graph Started filtering "with" out of some CPU names when dynamically creating a Radeon graphics card name (eg Radeon Graphics Ryzen 9 4900HS) Score display, due to incredibly slow values for some 2D/3D results on Microsoft Surface ARM systems, now when a score is less than 10 the score will be displayed to 1 decimal place. For the 3D GPU compute tests, the Nbody gravity, Mandelbrot and Qjulia4D have been compiled to run natively on Windows ARM. The OpenCL test cannot be run on Windows ARM. The DX11 test will be run in x86 emulated mode, again due to limited support for some of the DirectX libraries used for them. The DX12 test has been compiled to run natively. For 3D tests, due to limited support for some older DX9 and DX10 helper libraries these tests have not been converted and will not be run in the Windows ARM version of PerformanceTest. Initial release for Windows ARM support. All CPU, 2D, Memory and Disk tests have been natively compiled to run on Windows ARM.
ARM64, added workaround for broken SHA hashing in CryptoPP (using windows Bcrypt library instead) that was causing licencing errors and failure to show charts Made a change so ARM CPU info is loaded at start-up (to help with graphing display) Fixed bug in system information collection of Ice Lake-SP (3rd gen Xeon Scalable) CPU info Fixed an issue in system information collection when collecting disk partition info where function could return too early