SIV (System Information Viewer) 5.71

-Added initial Haswell-ULT and Lynx Point-LP support.
-Added ASRock X79 Extreme3 motherboard support.
-Improved Sandy Bridge-EP SMBus access and four processor systems support.
-Added initial Microsoft Surface Pro sensor reporting support.
-Added Fintek F71869A and F71889A sensor support.
-Added AMD RS400/133 Host Bridge support.
-Improved AMD 870 chipset recognition. Improved AMD A6/A8/A10 APU reporting.

Improved Intel Haswell support and updated to use the latest Intel logos.
Added initial AMD Annapurna (Richland) support.
Revised nVidia Optimus GPU reporting to prevent forcing the GPU back online.
Added generic support for Embedded Controller ACPI Method based Temperature and Fan Speed reporting.
Added initial ITE IT8731F and IT8732F sensor support.
Resolved ASUS P5B motherboard ATK0110 conflict with Intel QST, QST Voltage monitoring and CPU Fan Speed reporting.
Added reporting of Matrox MGA G200/G200eH/G200eR/G200eW WPCM450 clocks and G450/G550 Warp clock.

_http://mirror.szepe.net/siv/siv.zip

Validated Windows 8.1 RTM Build 9600 support, enabled ACPI operations and added .
Added Intel Atom (Bay Trail) support and allow for IA Core without Package power.
Added ITE IT8790E sensor chip reporting and updated Gigabyte Z87X motherboard support.
Added SMART Media Wearout Indicator and Total NAND Program Count reporting.
Update to compensate for changes in Intel Rapid Storage Technology V12.08.0.1016.
Added nVidia MCP73V chipset and MSI MS-7366 motherboard support.
Added Intel DX79SI and ECS 945GZ motherboard support.
Allow for some ACPI\INT340E methods reporting 0x80000000.
Updated the [SMBus Locks] panel for latest AIDA64 plus EasyTune and added SensorDetector.

»» Нажмите, для закрытия спойлера | Press to close the spoiler ««

_http://mirror.szepe.net/siv/siv.zip

Added ITE IT8603F support and improved AMD APU (Kaveri) plus (Trinity) power reporting.
Added persistent Temperature Scale selection and -TEMP=X to specify the temperature scale as °X.
Improved Sandy Bridge-E and Ivy Bridge-E QPI Link speed reporting.
Improved Haswell-E support, added initial DDR4 SPD and Thermal Sensor support.
Added ASRock FM2A88M plus P67 motherboard support and corrected the ASRock X79 Champion DRAM and VTT +1.2 voltage reporting.
Improved UPS power reporting for APC Back-UPS RS 550GI.
Resolved issue with [ACPI Eval] on Dell PowerEdge R910 systems.

_http://mirror.szepe.net/siv/siv.zip

Version 4.46 released on 14-Jul-2014
Update the [Windows] panel to display the Registered Processors plus Memory Allowed and added the [Windows Policies] panel for Vista and later.
Added reporting of any Hypervisor Virtual Machine and for Windows 8.1 V6.03 Build 9600 if Update 1 is installed.
Added the [Makers] panel which shows all the System and Motherboard Makers for all systems within a domain.
Added reporting of the number of active memory channels for Intel 5000, 5400 and 7300 chipsets.
Improve reporting of memory timing information on some Intel X38/X48 chipsets by enabling MCHBAR.
Report the Peak GFLOPS for nVidia GTX/GT 700 series CUDA GPUs.
Resolved issue with strange CPU % usage reporting that only happened on some Windows 7 x64 systems.
Corrected the reporting of DDR3 DIMM SPD information for DIMMs with none zero FTB values.
Improve the Controller Name for Texas Instruments XHCI Controller attached USB Disk Drives.
Added support for the Intel D5400XS (Skulltrail) and Gigabyte Z97X-SOC Force motherboards including IR3580 PWMs.
Compensate for Wine calling RaiseException() when SLGetWindowsInformation() is called.

_http://mirror.szepe.net/siv/siv.zip

Improved Intel Core i7 (Haswell-E) and X99 Chipset support.
Added support for Nuvoton NCT6791D sensors, ASUS H87M-PRO, Gigabyte Z87X-D3H and Intel DX48BT2 motherboards.
Added support for Intersil ISL6379 PWMs and the ASRock X99 series motherboards.
Added reporting of nVidia GPU Video clock speeds by using NVAPI_GPU_PUBLIC_CLOCK_VIDEO (new in R340 NVAPI).
Added reporting of Corsair Link Temperature and Fan/Pump Speed for H100i, H80i, etc.. This is available only when Corsair Link is not active as Corsair Link does not use the Access_CorsairLink mutex to interlock access to the Corsair Integrated USB Bridge.
Added support for Intel ACPI Power Management Devices (ACPI\INT33FD). Added exclusion for the ACPI \SAM_\UATB method.

_http://mirror.szepe.net/siv/siv.zip

Added support for Windows 10 V10.00 Build 9926. Enabled operation of [ACPI Buses], [ACPI Eval] and [ACPI Ports].
Added SMART reporting for Prolific Technology PL2773 USB to SATA Bridge attached Disk Drives.
Rationalised GPU reporting and resolved issue with the GPU-n Tool Tip on none nVidia/AMD GPUs. Allow for systems with AMD GPUs and have up to 64 displays.
Reworked the initial screen layout logic to better deal with an excessive number of Temperatures, Voltages and Fan Speeds.
Added re-initialisation of C-Link hardware about 30 seconds after resuming from sleep/hibernate when running in -CRLCTL mode. Updated [Link Fans] to workaround CL Mini, H110iGT, H100i and H80i manual feedback firmware issues when -CRLCTL is specified. Enhanced the [Link Status] dumps to report all instances of the data. Added reporting of Corsair AXi PSU -12 Volt information and support for the RM-Series PSU C-Link Adapter. Note that SIV will report RM-Series PSU information even when CL is active.
Added Nuvoton NCT6792D HWM, Intersil ISL6388 PWM sensor, EVGA 150-SE-E789, Gigabyte X99-SOC, MSI MS-7693 and MS-7888 motherboard support.
Added Ukrainian support. Workaround STATUS_DATATYPE_MISALIGNMENT issue within WinVerifyTrust() on Itanium.

_http://mirror.szepe.net/siv/siv.zip

Migrated from the SHA-1 to SHA-2 code signing. This has no real impact on most systems, but to use SIV V5 on W7 you need KB3033929 installed and on Vista x64 to disable Driver Signature Verification.
Added support for Windows 10 V10.00 Build 10074. Enabled operation of [ACPI HAL], [ACPI Buses], [ACPI Eval] and [ACPI Ports].
Resolved race condition when -CRLCTL is being used that causes intermittent issues on some systems.
Added Synthetic Temperatures (Menu->Tools->Configuration->Synthetic Setup) so custom curves can use the highest reading of multiple sensors and/or this can be displayed on the [Status] panel.
Added initial Intel Core i7 (Broadwell-H) and Intel Atom (Braswell) reporting.
Added ASRock Z97 OC Formula, ASUS MAXIMUS VII GENE, P8B75, P8Z77-V, Gigabyte Z97X-UD3, MSI MS-7881, Supermicro H8DMU and X10DAX motherboard support.
Extended ASUS Rampage IV motherboard support for embedded controller temperature, fan speed and voltage reporting.
Added Nuvoton W83793G SMBus hardware monitoring support.
Added the -SINGLE command line qualifier specify that only a single instance of SIV should be active.

_http://rh-software.com/downloads/siv.zip

_http://www.majorgeeks...viewer%29.html