| 2016 Sep 09
- Removed a reference to a debug class that was accidentally left in.
SSD-Z Changes | 2016 Sep 08
- More devices are recognized now. Thanks again for all the submissions.
- Fixed an error that would in some cases display the model name and especially the firmware incorrectly.
- Decoder: Now shows the form factor for Crucial devices.
- Unknown LiteOn devices will now properly display the LiteOn logo.
- No longer blocks support for Aero Snap, when moving the window to the screen edge.
- Certain devices with a capacity of 1TB or above, was not getting detected due to the pattern matching only looking for a "G" in the model name.
- Device Tab: The interface will now scale to the window size. To disable this, set "tabs.device.ui_scale" to 1.00, or any other factor you prefer. Using 0.00 means it will autoscale.
SSD-Z Changes | 2016 Jul 01
- The submission feature is working yet again.
- Submissions are now being posted over HTTPS.
SSD-Z Changes | 2016 Jun 29
- The submission feature is working again now.
SSD-Z Changes | 2016 Jun 23
- Added more devices, as well as fixed a few with missing or incorrect data.
- Corrected Silicon Power SSDs being detected as an S60 model. Unfortunately, as these SSDs all report the same model name, it's near impossible through software to determine the exact model.
- Fixed: If a device was removed from the system, any device with a larger ID after it, would not be detected.
- The default temperature unit will now always initialize as Celcius, even if your system has been configured for Imperial units. Click the temperature field to toggle the setting to Fahrenheit.
- Mouse wheel scrolling will now more intuitively reach the window under the mouse, and not the window with focus.
- Changed keyboard shortcut for "last active tab" from [F4] to [Ctrl + D]. This was to avoid the clash with the global combobox dropdown shortcut of F4.
- Added option to display the raw SMART attribute values as either decimal or hexadecimal.
- Fixed: Changing of the temperature unit, will now properly apply to all devices, and not only the current device.
- Added a new tab "Decoder", which for some devices can decode and display the meaning of the model number. Accessible from the system menu, by right-clicking the window caption.
- Restructured how the SMART attributes and thresholds are stored and accessed internally. This should fix those extremly rare cases of the threshold ID not matching up with the attribute ID.
- ListView column headers are now properly scaled to the system DPI.
- New "Speed" field on the device tab. It shows the active SATA transfer speed, out of the device's maximum.
»» Нажмите, для закрытия спойлера | Press to close the spoiler ««